Corporate Headquarters:

Sales

Technical Support

Website Issues

Online Contact Forms:

Directions:

From the Baltimore Beltway, I-695 (Suggested Route #1):

1. Take I-795N/NW toward Owings Mills/Reisterstown.
2. After almost 10 miles on I-795N/NW, take MD-140W.
3. After approximately 12.5 miles on MD-140W, turn left at MD-31W/New Windsor Rd.
4. After approximately 6.5 miles on MD-31W, you will come to a stop sign at the center of New Windsor. Turn left at the stop sign onto Main St and you will immediately see L-1 Standards and Technology on the right with the large whilte roll-up door. Street parking is available for free.
   

From the Baltimore Beltway, I-695 (Suggested Route #2):

1. Take I-70W toward Frederick.
2. After approimately 23.5 miles on I-70W, take exit 68 for MD-27N/Ridge Rd.
3. MD-27N will intersect MD-26 at Taylorsville. Continue on MD-27N/Ridge Rd.
4. After approimately 10.5 miles on MD-27N/Ridge Rd, turn left on MD-407N/Marston Rd. (There is no stop light or stop sign at this intersection, but there is a Little George's grocery store on the right.)
5. After approimately 3 miles on Marston Rd, turn right at the intersection of S Marston Rd and Marston Rd to stay on Marston Rd.
6. Continue on Marston Rd for slightly less than a mile.
7. Turn right on MD-31E.
8. Stay on MD-31E into the town of New Windsor where MD-31E is named High St.
9. After about 2 miles on MD-31E/High St, L-1 Standards and Technology is on the left with the large whilte roll-up door before the intersection of High St and Main St. Street parking is available for free.
   

From the Washington, DC Beltway, I-495:

1. Take the I-495 beltway to I-270N.
2. After approximately 15 miles on I-270N, take exit 16A for MD-27 Father Hurley Boulevard-Damascus.
3. Keep right at the fork to merge onto MD-27E/Ridge Rd.
4. MD-27E/Ridge Rd becomes MD-27N/Ridge Rd.
5. Stay on MD-27N/Ridge Rd through Damascus.
6. MD-27N will cross under I-70 at Mt. Airy. Continue on MD-27N/Ridge Rd.
7. MD-27N will then intersect MD-26 at Taylorsville. Continue on MD-27N/Ridge Rd.
8. Approximately 2 miles after the MD-26 intersection, turn left on MD-407N/Marston Rd. (There is no stop light or stop sign at this intersection, but there is a Little George's grocery store on the right.)
9. After approimately 3 miles on Marston Rd, turn right at the intersection of S Marston Rd and Marston Rd to stay on Marston Rd.
10. Continue on Marston Rd for slightly less than a mile.
11. Turn right on MD-31E.
12. Stay on MD-31E into the town of New Windsor where MD-31E is named High St.
13. After about 2 miles on MD-31E/High St, L-1 Standards and Technology is on the left with the large whilte roll-up door before the intersection of High St and Main St. Street parking is available for free.
    

From I-270 in Frederick, MD:

1. I-270N becomes US-15N.
2. From US-15N, take exit 17 to merge onto MD-26E.
3. After approximately 1.5 miles, bear right to stay on MD-26E where MD-194 intersects.
4. Continue on MD-26E for approximately 8 miles through the towns of Mt. Pleasant and Libertytown.
5. Just past Libertytown, turn left at MD-31E toward New Windsor.
6. Continue on MD-31E for approximately 10 miles into the town of New Windsor. L-1 Standards and Technology is on the left with the large white roll-up door before the intersection of High St and Main St. Street parking is available for free.
   

From I-70 in Frederick, MD:

1. From I-70E, take exit 62 for MD-75N toward Libertytown.
2. At the stoplight at the end of exit 62, turn left onto MD-75N.
3. After approximately 7.5 miles on MD-75N, at the stoplight in Libertytown, turn right onto MD-26E.
4. Continue on MD-26E for approximately 0.5 miles and turn left at MD-31E toward New Windsor.
5. Continue on MD-31E for approximately 10 miles into the town of New Windsor. L-1 Standards and Technology is on the left with the large white roll-up door before the intersection of High St and Main St. Street parking is available for free.
   

Maps: